The mydlink-enabled Wireless N Day/Night Home Network Camera (DCS-932L), is the perfect camera for your home or small office. The Built-in IR LEDs lets you see what is going on even when there is little or no light.

Simply connect the cables, plug in the camera, run the short installation wizard and setup is complete. To view what the camera is seeing, simply log on to mydlink.com, choose your device, and start viewing - there is no need to configure your router to open up ports or remember hard-to-memorize Internet addresses.

Benefits of mydlink™

mydlink products are created for people who long to embrace a world connected through the Internet, but are afraid they lack the technical expertise to do so. mydlink products remove the learning curve that is typically associated with today's high-tech devices because they are truly Plug-and-Play compatible with zero or extremely easy configuration. mydlink provides you easy and straightforward access to your digital life all from our intuitive, convenient website (www.mydlink.com). mydlink makes it easy to get the most from your digital lifestyle without the learning curve.

Convenient Access, Anywhere, Anytime

As a mydlink-enabled device, you can access the DCS-932L anytime, anywhere you have Internet access. Get peace of mind by keeping an eye on your kids, pets, home or office from almost anywhere by simply logging on to the mydlink website and selecting your camera. Since the DCS-932L comes with a built-in microphone, you can see and hear for yourself that everything is well at home.

Camera Management Software

For advanced users that want more out of their camera, the DCS-932L also comes with D-Link D-ViewCam™ management software for Windows PCs. D-ViewCam comes with a host of features including the ability to record directly from the camera to a local hard drive, trigger motion detection, set recording schedules, set e-mail alert notifications, and even support for up to 32 cameras. D-ViewCam also allows you to upload a floor plan of your home or small business and create a realistic layout of where your cameras are located, providing you with better access to your camera. For even greater recording flexibility, D-ViewCam can record video directly to a Network Attached Storage (NAS) device, eliminating the need for a dedicated computer to store video.

There are couple of ways to install DCS-960L/DCS-936L/DCS-2530 cameras

Steps are similar for these 3 cameras.

1. CWN Setup method(Camera Wi-Fi Network)
   Scenario 1: via Universal Setup Wizard
   Scenario 2: Via mydlink lite app

mydlink lite app (iOS / Android)

Step 1: Download mydlink lite app from app store or google play store. Autocad 2017 xforce keygen for mac.

Step 2: Click on Local tab, after the app explores for nearby cameras in the network click on ‘Add a new camera’

Step 3: If you have QR Code from the configuration card, scan the code or select NO for QR code and select the camera model manually.

Step 4: Plug in power adapter, click Next and select ‘NO’ for WPS and then click ‘Ready’ if the LED on the camera flashing Orange

Step 5 : Connect your mobile to the camera Wi-Fi (SSID & password is on the configuration card or on the camera label). Get back to the app and click Next

Step 6: Now the camera will scan for your wireless networks. Select your wifi name from the list, enter password to connect

Step 5: After successful connection, app will set the timezone based on phone’s region settings. Click OK

Step 6: If you already signed in to mydlink account, you will be prompted to add to your mydlink account. Select YES and create a password for the camera. Now the camera is setup

Note: If you click on remote and if you get ‘firmware update’ notification, try upgrading the firmware, it may take upto 5-10 min.

Enabling Motion detection recording to SD card through mydlink lite app

1. Tap on the camera from local/remote tab on mydlink lite app
2. Click on the 3 dots on the top right corner
3. Click on Settings, Motion detection

4. Enable motion detection, select the active area (optional)and enable ‘Recording by motion detection’.

5. Go back, and the recording is enabled to record to an SD card

Note : By default, the maximum video length is 1 min when enabled recording from mydlink lite app. You can change by login to the camera via its IP address

CWN Setup method

This setup can be used if for some reason you cannot able to complete setup using mydlink lite app on your phone/tablet.

Step 1: Connect your mobile phone/tablet/laptop to the camera wifi network. (The camera wifi name and password is on the configuration card you received with the camera)

Step 2: If you don’t see the camera wifi network, make sure the LED on the camera is blinking orange/amber and try factory reset on the camera.

Step 3: Once connected, open a web browser on your phone/tablet and go to 10.255.255.1 (type the numbers in the address bar and press enter).

Step 4: You will ask to enter username & password. By default username is Admin and leave the password field blank and click Login

Step 5: Once logged in, click on Setup and Wireless settings on the left.

Step 6: Click on Scan/Site survey and connect to your wifi network, type your wifi password and click Save settings

Step 7: Now the LED must be Green on the camera. If yes, the camera is on your network now.

Once the camera is on network, either you can register for mydlink service through mydlink lite app or Universal Setup wizard on your computer.

Through mydlink lite app

1. Open mydlink lite app, click on local tab.
2. Wait until the app finish ‘exploring nearby cameras’.
3. Once done, you should be able to see the camera listed (If you don’t find the camera CLICK HERE)
4. Click on the ‘+’ icon in the blue cloud
   
5. Create a password for the camera or use the password if you already have one.
   
6. It will ask you to either register for mydlink service or add to your already existing account

Click on remote tab, you should see the camera listed and online. Upgrade firmware if it asks you to do.

If you don’t find the camera in local tab, LED is green on the camera

1. Open mydlink lite app, click on ‘Add a New camera’
   
2. Scan the QR Code or Manually select the camera from the list
   
3. Select YES on WPS Setup screen. Swipe left until you see READY
   
4. click on Ready (Do not press any WPS button on router or on the camera)
5. Once done, it will ask you to create a password for the camera
   
6. Once the timezone is selected, it will ask you to add to existing mydlink account or create a new account
   
7. Setup should now be completed.

Through Universal setup wizard

1. Download Universal Setup Wizard from mydlink.com or support.dlink.ca
2. Once downloaded, open the file, allow or click yes if you see any firewall notifications.

3. Select language, Click on Start

4. Accept T & C (I Agree)

5. DO NOT choose the camera model, instead click on SKIP INSTRUCTION

6. No the wizard should show up all the cameras right now on the network. Select the camera you wish to add to your mydlink account.

7. Create a password for the camera & click NEXT

8. Create New account or use Existing account if you already have mydlink account.

9. Setup is now complete.